Jual Level Sensor Capacitive


Continuous measurement of solids/liquids level and interface level


  • Continuous measurement of level and interface of any material
    Offers interface measurement of two materials with different dielectric constant as well as level measurement of liquids and solids.
  • No affection from buildup on the pipe
    The measurement electrode is sealed in a pipe, so buildup on the pipe or electric interference poses no issue.
  • No affection from pressure or chemicals
    The electrode is sealed in a chemical resistant plastic pipe and isolated from process. The sensor offers stable operation regardless of environment in the tank.

Principle of Operation

  • The electrode is suspended from the detector in the pipe using coaxial cable. The cable end is wound on the spool and then connected to an external device through the slip ring.
  • When inductance and the detected capacitance tune to the frequency of the voltage applied from the controller, the parallel resonance circuit resonates, causing a highest high frequency voltage to be applied to the electrode.
  • The high frequency voltage on the measurement electrode varies with the measured capacitance, and so does the output voltage.
  • The reference voltage is adjusted such that the center of the electrode becomes the zero point, and the bridge circuit is made to output zero at this point.
  • When a voltage (+E or ?E) is applied to the electrode due to level change, the servo motor rotates normally or reversely so that the bridge is always balanced, causing the electrode to rise or fall with the material surface.
Measurement of level in a tank using capacitive type level Capacitance. · Conductivity. Capacitance Level Measurement: Capacitive level transducer is an example of indirect measurement of level. Capacitance level sensors are used for wide variety of solids, aqueous and organic liquids, and slurries. The technique is frequently referred as RF as radio frequency signals   plied  o ... How Capacitive Liquid Level Sensors Work:   Capacitive Fluid The storage capability of a .. . A capacitor is made up of two conductive plates which are separated from each other by a dielectric.

Level Sensors easily mount to the outside of a container and measure through almost any non-metallic material. They are custom designed and optimized for a range of applications such as medical devices, pump controls, beverage machines etc. A design can use a traditional printed circuit board for a flat ... Capacitive level measurement - VEGACAL | VEGA | VEGA Capacitive level sensor as cable probe or rod probe for level measurement in bulk solids and liquids. Operating Principle of Capacitance Level Sensors ~ Learning Capacitance level instruments operate on the basic principle of the variation of the electrical capacity or capacitance of a capacitor formed by the sensor, vessel wall and dielectric material

Capacitive level sensors CLS-23 - Dinel, s.r.o. capacitive level sensor for sensing various types liquids, detection of various types electrical conductive or non-conductive liquids (water, water solution, cooling liquids, oil, ets.) Level Sensors » Gill Sensors & Engine Controls Reliable and highly accurate Capacitive liquid level sensors for demanding applications. Ourcapacitive level technology accurately measures the change in fluid level within standard and irregular tanks. Capacitive-Based Liquid Level Sensing Sensor Liquid level sensing using capacitive sensing technology. •. Out-of-Phase (OoP) technique eliminates any proximity interference such as a human hand either nearby or in contact with the container. •. Rigid-flex circuit allows the sensors to be placed on various shaped surfaces. •. Liquid height resolution <1mm. •. Includes ...
Scroll to top