Applications
Pump control of tanks and pits in water/wastewater facilities and effluent treatment facilities
Features
Principle of Operation
The float is designed to have large buoyancy, and the center of the buoyancy is closer to the float bottom and the center of gravity closer to the cable. The float sinks in water when the liquid level is rising (SG = 1). Since the centers of buoyancy and gravity are not at the same point, the float tilts, and the steel ball inside the float rolls, causing the microswitch to close its contacts.
The float operates in a reversed manner when the liquid level is falling, that is, the float tilts the other way and the steel ball returns to its original place, causing the microswitch to open its contacts.
|
The Easiest Way To Setup & Install Cable Suspended
Float Switches Controlling pumps with your standard cable suspended
float switch is honestly a pain in the neck. You'll need at least two
of them to get the job done, with a controller that handles all the logic. You
have to tie them to some conduit to keep them from getting tangled. And the
failure rate isn't that great either. Cable Suspended Float Level
Sensors - APG Sensors TLS Cable Suspended Float Level Sensors.
APG. Automation Products Group, Inc.®. Rev. 10.08. TLS. Cable Suspended
Float Level Sensors. □ One float gives a
latched signal between two different levels. □ Differential and switch level
points are easily field adjustable. □ Unique tumbling action. Cable Suspended
Float Sensor FT|PROCESS AUTOMATION
The float is designed to have large
buoyancy, and the center of the buoyancy is closer to the floatbottom
and the center of gravity closer to the cable. The float sinks
in water when the liquid level is rising (SG = 1). Since the centers of
buoyancy and gravity are not at the same point, the float tilts,
and the steel ball inside the ... Cable Suspended Float Level Sensors -
Omni Controls s No maintenance required s Cost effective s Operational
Description. The KARI float switches are unique cable
suspended liquid level sensors offering convenience
and reliability for a wide range of pump control and alarm applications. Their
most important feature is the ability to sense multiple levels using only one float.
Cable-Suspended Float Switches On F.W. Webb Company KARI float switches are
unique cable-suspended liquid level sensors offering
convenience and reliability for a wide range of pump control and alarm
applications. Their most important feature is the ability to sense multiple
levels using only one float. This results in a simple device that
can be used in many different level ...
Cable Suspended Float Switch - Cable Float Level Switch Cable
Float Level Switch is a control device for filling
and discharging pumps, motor, and magnetic valves. It is also an alarm device
at certain pre-determined surface levels. It is suitable for use in
non-flammable liquids at 250 volts. In dangerous environments (e.g. wells and
pumping stations) we recommend 24 V voltage. Suspended float switch - SLS –
WIKA Suspended float switches are attached to a highly flexible cable
hanging from above and contain a micro switch, which is
potted and enclosed, shock and With the. APG FT-100 Series Cable Suspended
Float Switches The APG FT series cable suspended floats are
designed for high or low level indication. Counterweight for use on cable
suspended float switches. - Cynergy3 This counterweight is used to set or
adjust the pivot point for a cable suspended float switch. The
position on the cable relative to the switch can be used to adjust the liquid
level differential between open and closed switch output. Most of the cable
suspended float switches from Cynergy3 are supplied with these
